electronics
Rocketmotion | Black Sky | LOC | Missile Works | Public Missiles
Missile Works
Missile Works Electronics | Missile Works Accessories
Missile Works Electronics
Unit   Dimensions   Weight   Description  Price   Quantity   Add to Cart  
RRC2 1.3" x 5.9"   1.76 oz w/o battery   Rocket Recovery Controller  $89.95  
  • 0-25,000 Ft. MSL altitude range
  • 2 independent recovery stages with 1.25 amp FET outputs/capacitive discharge
  • Stage 1 fires at apogee Stage 2 fires at 1000'/800'/500'/300' AGL (switch selectable)
  • Standard 2 stage apogee/AGL recovery or redundant apogee deployment (switch selectable)
  • User programmable mach flight inhibit timer (switch selectable at 4/8/12 seconds)
  • Audibly reported peak altitude within 3% AGL span
  • Audible ejection charge continuity verification with 80 ľa sample current
  • Auto compensating lift off detection that's immune to normal temp or barometric variation
  • Barometric sensor test with live zero and audible alert
  • Full input and output test mode to pre-test on the ground
  • Superior compression terminal strips for external switch and ejection charge wiring
  • Operational status LED indicator
  • Positive battery retention hardware
  • Perfect fit into a 38mm coupler tube
RRC2X 1.3" x 3.6"   1 oz w/o battery   Rocket Recovery Controller Extreme  $89.95  
  • 0-25,000 Ft. MSL altitude range
  • 2 independent recovery stages with 1.25 amp FET outputs/capacitive discharge
  • Stage 1 fires at apogee Stage 2 fires at 1000'/800'/500'/300' AGL (switch selectable)
  • Standard 2 stage apogee/AGL recovery or redundant apogee deployment (switch selectable)
  • User programmable mach flight inhibit timer (switch selectable at 4/8/12 seconds)
  • Audibly reported peak altitude within 3% AGL span
  • Audible ejection charge continuity verification with 80 ľa sample current
  • Auto compensating lift off detection that's immune to normal temp or barometric variation
  • Barometric sensor test with live zero and audible alert
  • Full input and output test mode to pre-test on the ground
  • Superior compression terminal strips for external switch and ejection charge wiring
  • Operational status LED indicator
  • Perfect fit into a 38mm coupler tube
  • Designed for external battery
PET2 1.38" x 3.85"   1.16 oz   Dual Event Programmable Timer  $74.95  
  • Four triggering modes (G-switch make / G-switch break / Pull-Pin / G-switch and Pull-Pin)
  • Dual timebase capable (0.5 - 8.0 secs @ 0.5 sec interval / 2 - 32 secs @ 2 sec interval)
  • Dual timer operation mode (one-shot or interval repeat)
  • Two completely independent timers capable of any trigger, timebase or operation mode combo
  • High current 1.25 amp MOSFET outputs
  • Audible continuity verification on the pad and post flight
  • Pull pin alarm mode
  • Audible DIP switch and multiplexer input test mode
  • Easily programmed and configured via DIP switch settings
  • Superior compression terminal strips for pull-pin, charges and battery wiring
  • Mil-spec TO-18 axial 2.6G mechanical G-switch with 0.5 sec software debounce
  • External battery power range from 8-12 volts DC


|| ||
last update: 3/4/2006 9:02:03 PM